New Hybrid Thermoplastic Composite Aero-structures manufactured by Out of Autoclave Continuous Automated Technologies

The NHYTE, an ambitious European collaborative research partnership, aims to lead the European aviation sector to the next step, tackling the challenges that the sector currently faces. Particularly, NHYTE focuses on developing concepts and methodologies that will enable the realization of innovative and green integrated aero-structures made by a new recyclable hybrid thermoplastic composite material with multifunctional capabilities. The proposed high-performing hybrid material answers to the needs for reduced weight and consequently reduced fuel consumptions and emissions of an aircraft, as well as for more ecological and less costly manufacturing processes.

Aero-structures for demonstration purposes will be fabricated by an innovative working cell implementing an advanced continuous automated production process, including: 

  • automated hybrid material fabrication, 
  • manufacturing of skin panels by automated fiber placement in-situ consolidation process,
  • fabrication of stringers by continuous forming, and
  • component assembly by induction welding

The innovative material is an example of multifunctional composite, since it returns both functions of toughness improvement (multilayer material) and process simplification. This concept on one side will provide an advantage from the structural point of view, in terms of better impact damage performance; while on the other side major advantages will result on processing simplification including improved cycle times and lower energy consumptions, since it does not require the use of an autoclave curing phase. As of today, its usage has been limited to fabricate panels, only at laboratory level; hence, a suitable improvement finalized to process in industrial environment is needed.

Proposed process techniques and assembly will be the first step towards the industrial application of the innovative material. Consortium has set a target for weight saving not less than 5% for primary structures. Further reduction of full life cycle cost is expected from scrap material and end of life structures recycling.

Funded by the European Commission under the H2020 Framework Programme, officially began its three year old lifetime in May 2017. It is coordinated by the Italian NOVOTECH Aerospace Advanced Technology s.r.l. and funded with total budget approximately 5,2M €.

For more information on the project and the progress performed, please visit the NHYTE official website at https://www.nhyte-h2020.eu


Socialize with us



Central Office
EASN Technology Innovation Services BVBA
Terweidenstraat 28
B-3440 Budingen
Branch office (GR)
EASN Technology Innovation Services BVBA
Patras Science Park
Stadiou Str., Platani
26504, Patras, Greece
Tel: +30.2610.911378

Branch office (CY)
EASN Technology Innovation Services BVBA
Ioanni Polemi 32A
3085, Limassol , Cyprus
Tel: +357.25212390

EASN Association

Go to top